The Drive ++ is the most the convenient wav to add small level automation to a machine, which uses a PMDC motor. The microprocessor guarantees slow start and instant shut down on faults and fail safe conditions

The Start/Restart conditions can be set from the front panel display. The 16x2 line Backlit alphanumeric LCD display status and error conditions. It also enables plain English language programming of the instrument.

The five opto-isolated inputs can be used as either enable or start {stop, limit switch or key input functions. One of the inputs can be used as count input. This will allow small automation applications such as the bag filling and the cut to length etc.

Using internal commands various speed profiles and or profiles based on number of pulses can be programmed. The programming is in simple plain English language like statements.

"LI FWD,FOR C<I642, RU8,N250,RD4,STOP"

Means run forward for count less thanl642 with ramp up of level 8,
speed step of250 and ramp down of level 4 and then stop